• Facebook
  • Twitter

AQUASHIELD PLUS is a 2 component cementitious flexible waterproofing compound formulated for direct application over concrete surfaces. Its 2 component system utilizes a blend of cementitious materials and the latest polymer technology. This highly effective waterproofing is flexible, non-toxic, easy to apply and compatible with tiling, elastomeric paint, concrete topping and plastering. Aquashield Plus is spread in a paint-like manner to bridge hairline cracks and for total coverage. Its water base formula makes Aquashield Plus an economical and safe product to use.

  • Stays Flexible
  • Superior Bonding
  • Time Saving
  • Fast & Easy
  • Non-Toxic
  • Eco-friendly


Aquashield Plus Coverage (approx.)
4.5kg set 1.5m² (at 2 coats)
36kg set 12m² (at 2 coats)
Calculation is based on applying 2 coats of waterproofing.
Consumption is dependent on substrate condition.

Packaging: 4.5 kg set and 36 kg set (each set contains 2 components – liquid & powder)

Storage & Shelf Life:  When stored in a cool dry place & in its original unopened packaging, Aquashield Plus will remain usable one year from date of manufacture.

Warranty: Due to variety of applications, different working methods and the various properties of bases, we cannot assume responsibility or liability with regard to the application of our products. Our guarantee and liability are restricted to the quality of our products at the time of acceptance of the customer of such products. In no case shall our liability extend beyond replacement of defective products, if any, found at the time of acceptance. For all deliveries and services, our General Sales Condition including warranties stipulated for each case are valid.

How to use Aquashield Plus

1. Mixing

In a clean plastic pail, pour Aquashield liquid component & add Aquashield powder. Stir to attain a smooth and lump-free consistency.

Mixing Ratio
Component A
Component B

Caution: Use only non-absorptive materials as mixing base (plastic pail or G.I. sheets). If absorptive materials such as plywood, wooden box, gypsum board, fiber cement board or cardboard is used, it will affect the chemical properties of the product, which can result in bonding failure and poor product performance.

2. Application

A stiff bristle brush is the best and fastest tool to apply Aquashield. This flexible cementitious waterproofing must be applied in 2 coats & spread in a paint-like manner for total coverage. The coats have to be applied in two directions – horizontal and vertical, to form a weave like coating to ensure all surfaces are covered and no pinholes are created. Wait 4 – 6 hours before applying the second coat.

If a third coat is required, observe the same time interval and procedure prior to application.

For areas exposed to direct sunlight (e.g. roof deck) cover waterproofed area with a damp cloth or plastic sheet to prevent premature curing. In cases where water seepages or infiltration is heavy, 3 – 4 coats might be necessary.

3. Finishing

Any waterproofing membrane must at all times have tiling, concrete topping, plaster or skimcoat to protect it from any possible damage.

Aquashield Plus must cure for at least 3 days depending on application area, weather and site conditions before any finishing. Preparations must be done respectively prior to any of the following finishing choices:

  • Skimcoat / Render – Prior to skimcoating, brush on Redifix slurry & let set for at least 4 hours or overnight, for best result. Zemcoat Skimcoat’s max. thickness is 5mm. Follow Redifix slurry mixing ratio: 1L Redifix : 1L Water : 3kg ABC Tile Adhesive
  • Tiles – Trowel ABC Tile Adhesive mortar directly on top of fully cured Aquashield.
  • Mortar Topping – Apply mortar topping with Zembond admixture. Follow Zembond admixture mixing ratio: 4L Zembond : 1 bag cement. Use this as gauging water for the cement and sand mixture.
    Note: Water consumption is dependent on mortar use, moisture content of sand and weather conditions.
  • Elastomeric Paint – paint directly on top of Aquashield.