ABC SANDED TILE GROUT is ideal for pavers, vigan tiles & decorative stone installations that requires wide tile joint width of 7-19mm to achieve a rustic finish.

ABC SANDED TILE GROUT is ideal for wide gap (7-19mm) pavers, vigan tiles & decorative stone installations to achieve a rustic finish.

  • Durable & Crack – free
  • Non-fading & uniform color
  • Professional Finish
  • Eco-friendly & Low VOC Levels

Coverage:

Variant Tile Size Joint Width Approx. Coverage
Tile Grout Original

Bio-Tech Tile Grout
2kg30 x 30cm3mm8m²
Sanded Tile Grout 5kg10 x 10cm10mm2m²
Coverage is dependent on tile size, substrate condition and tile joint width.

Colors: 

F10-S Carmine Red, F11-S Terra Cotta, F13-S Anthracite, F14-S Gray, P20-S Dark Brown

Packaging: 

  • 2 kg plastic bag – ABC Tile Grout Original & Bio-Tech Tile Grout
  • 5kg plastic bag – Sanded Tile Grout
  • 25kg multilayer paper bag available for all variants upon special request.

Storage & Shelf Life:  Store in a cool dry place. ABC Tile Grout will remain usable 18 months from date of manufacture.

Warranty: Due to variety of applications, different working methods and the various properties of bases, we cannot assume responsibility or liability with regard to the application of our products. Our guarantee and liability are restricted to the quality of our products at the time of acceptance of the customer of such products. In no case shall our liability extend beyond replacement of defective products, if any, found at the time of acceptance. For all deliveries and services, our General Sales Condition including warranties stipulated for each case are valid.

Surface Preparation

Tiled area must have cured at least 24 hours prior to Tile Grout application. Clean tiles & tile joints from excess tile adhesive & other loose material before applying the tile grout. Dampen tile joints with a sponge or brush using clean water only.

How to use Sanded Tile Grout

1. Mixing

Pour liquid (water or ABC Tile Grout Waterproofing) into a pail & add tile grout. Mix to attain a smooth and lump-free consistency. If water is used, let mix rest for 15 mins. and restirr briefly before applying. If ABC Tile Grout Waterproofing is used, apply immediately. Observe pot life.

Caution: Use only non-absorptive materials as mixing base (plastic pail or G.I. sheet). Never mix different tile grout colors to achieve a different color.

Pot Life
Tile Grout mixed w/ Water 1 hour
Tile Grout mxied w/ ABC Tile Grout Waterproofing 20 mins.

TIP: ABC Tile Grout Waterproofing additive is recommended to safeguard tiled areas that are frequently or permanently immersed in water for lasting protection.

Mixing Ratio
Variant mixed w/ watermixed w/ ABC Tile Grout Waterproofing
Tile Grout Original2kg 650ml 750ml
Bio-Tech Tile Grout2kg 650ml 750ml
Sanded Tile Grout5kg 1000ml 1125ml

2. Application

Spread tile grout mortar diagonally using a squeegee.  Apply pressure to fill joints uniformly.

TIP: For a long-lasting grout job, make sure all the joints are completely filled with grout. To accomplish this, make several passes over the same area from different directions with the squeegee or grout float.

3. Finishing / Cleaning
After 5 minutes remove haze on tiles with a damp sponge. Let dry. Polish remaining residue with a lint-free cloth to reveal the tile grout color. Ready for foot traffic after 24 hours.