ABC TILE GROUT WATERPROOFING with Bio-Tech System is an acrylic based tile grout additive. It makes tile grout waterproof, stain resistant and more durable for easy maintenance. It is specially formulated for direct mixing with ABC TILE GROUT. It brings out the grout’s color and greatly improves its abrasion resistance, bonding and flexural strength. ABC TILE GROUT WATERPROOFING is essential to safeguard tiled areas that are permanently or frequently immersed in water for lasting protection & hygienic living.
- Mold & mildew resistant
- Anti – Bacteria
- Stain Resistant
- Increases grout’s durability
- Indoor & Outdoor application
- Easy grout maintenance
Variant Tile Size Joint Width Approx. Coverage
Tile Grout Original
Bio-Tech Tile Grout
2kg 30 x 30cm 3mm 8m²
Sanded Tile Grout 5kg 10 x 10cm 10mm 2m²
Coverage is dependent on tile size, substrate condition and tile joint width.
Packaging: 750ml plastic container
Storage & Shelf Life: When stored in a cool dry place & in its original unopened packaging, ABC Tile Grout Waterproofing will remain usable one year from date of manufacture.
Warranty: Due to variety of applications, different working methods and the various properties of bases, we cannot assume responsibility or liability with regard to the application of our products. Our guarantee and liability are restricted to the quality of our products at the time of acceptance of the customer of such products. In no case shall our liability extend beyond replacement of defective products, if any, found at the time of acceptance. For all deliveries and services, our General Sales Condition including warranties stipulated for each case are valid.
Tiled area must have cured at least 24 hours prior to Tile Grout application. Clean tiles & tile joints from excess tile adhesive & other loose material before applying the tile grout. Dampen tile joints with a sponge or brush using clean water only.
How to use Tile Grout Waterproofing
Mix in small quantities only since it has short pot life. Follow the exact mixing ratio, otherwise it will change the consistency & properties of the mix. NEVER add water. Shake Tile Grout Waterproofing well and pour into a plastic pail. Add ABC Tile Grout. Stir to achieve a workable, pasty consistency. Use a low speed mixer for best results. Use immediately.
|Tile Grout Waterproofing + ABC Tile Grout|
|750ml||2kg Tile Grout Original|
|2kg Bio-Tech Tile Grout|
|1125ml||5kg Sanded Tile Grout|
Caution: Use only non-absorptive materials as mixing base (plastic pail or G.I. sheet). If absorptive materials such as plywood, wooden box, gypsum board, fiber cement board or cardboard is used, it will affect the chemical properties of the product, which can result in bonding failure and poor product performance.
Spread tile grout mixture diagonally using a rubber-faced float or squeegee. Apply pressure to fill joints uniformly. Observe Pot Life of 20 minutes. Apply the grout mixture 1- 2m2 at a time.
TIP: Do not let grout mixture set on the tiles longer than 5 minutes, to prevent the tiles from being stained.
After 5 minutes remove haze on tiles with a damp sponge. After 1 to 1 1/2 hours, polish remaining residue with a lint-free cloth to reveal the grout color. Ready for foot traffic after 24 hours.