ABC SILICONE SEALANT GLAZING GRADE is a room temperature vulcanizing (RTV) acetic acid cure silicone sealant with outstanding adhesive strength. It is suitable for universal indoor/outdoor applications such as glass to aluminum and other non-corrosive metals, all glass construction such as curtain walls, store fronts, windows, glass blocks & glass cages, double glazing windows, filing gaps around door & window frames, insulation finishing system, aquariums and sanitary ceramics.
- Low Modulus
- Superior adhesion
- Air tight
- UV & Weather Resistant
- Permanently Elastic
- DIN 18545 (D) German Institute for Standardization
- TT-S-00-1543A (USA) American National Standards Institute
- ISO 8690 (UK) International Organization for Standardization
- BS 5889 (GB) Base Station Conformance Testing
The Following data is intended as guideline and not for preparing specifications.
Specimen measured after 4 weeks storage at 23 ℃ / 50% relative humidity.
TIP: For cleanest possible result and a perfectly straight line sealant application, especially in hard-to-reach places, use masking tape. Apply the tape covering both sides of the line to be sealed, and then remove the tape before the sealant is dry.
a. Use a standard caulking gun to dispense the sealant.
Note:The use of a caulking gun ensures even distribution for a professional finish. TIP: Hold the sealant gun at an angle of 45° while pulling the gun towards yourself. Find the right working speed to properly fill the necessary gaps.
b. Ensure the sealant is in contact with both sides of joints and gaps. Use foam backer rods to establish good bonding at the sides and to control the depth of the sealant.
2. Finishing Remove excess sealant and tool with flat knife. Depending on humidity & temperature, applied sealant is touch dry after 30 minutes.
Note: Protect from water exposure for at least 4 hours after application.
Due to variety of applications, different working methods and the various properties of bases, we cannot assume responsibility or liability with regard to the application of our products. Our guarantee and liability are restricted to the quality of our products at the time of acceptance of the customer of such products. In no case shall our liability extend beyond replacement of defective products, if any, found at the time of acceptance. For all deliveries and services, our General Sales Condition including warranties stipulated for each case are valid.