REDIFIX Tile Adhesive Additive is an acrylic based polymer additive to ABC Tile Adhesive Original. It makes indoor & outdoor non-concrete tile installations possible such as tile-over-tile, tiling on wood, metal, gypsum & fiber cement board and marble & granolithic flooring. Redifix adds flexibility without compromising the adhesive’s bonding strength.

  • Extra Strong
  • Extra Flexible
  • Thermal Deformability
  • High Shear Strength
  • Tiling on Non-concrete substrates

Coverage: 

STEP 1: REDIFIX SLURRY Mixing Ratio Coverage (approx.)
RedifixWaterTile Adhesive Original8 - 9 m²
1 L1 L3 kg
4 L4 L12 kg32 - 36 m²
Coverage is dependent on tile size, substrate condition & application thickness.
STEP 2: REDIFIX MODIFIED TILE ADHESIVE Mixing Ratio Coverage (approx.)
Redifix Water Tile Adhesive Original 0.8 m²
800 ml800 ml5 kg
4 L 4 L 25 kg4 m²
Calculation is based on 30 x 30cm tiles with 4mm adhesive thickness.

Packaging: 1L plastic pouch & 4L plastic container

Storage & Shelf Life:  When stored in a cool dry place & in its original unopened packaging, Redifix Tile Adhesive Additive will remain usable one year from date of manufacture.

Warranty: Due to variety of applications, different working methods and the various properties of bases, we cannot assume responsibility or liability with regard to the application of our products. Our guarantee and liability are restricted to the quality of our products at the time of acceptance of the customer of such products. In no case shall our liability extend beyond replacement of defective products, if any, found at the time of acceptance. For all deliveries and services, our General Sales Condition including warranties stipulated for each case are valid.

Surface Preparation

The surface must be fully cured, structurally stable, level, even, clean and free of paint & contaminants such as dirt, dust, loose material, oils and chemicals. The use of a level bar is essential to ensure levelness and / or plumbness of the surface. For painted surfaces, acid etch or abrade paint to ensure proper bonding.

How to use Redifix

Caution: Use only non-absorptive materials as mixing base (plastic pail or G.I. sheets). If absorptive materials such as plywood, wooden box, gypsum board, fiber cement board or cardboard is used, it will affect the chemical properties of the product, which can result in bonding failure and poor product performance.

REDIFIX as Slurry
The slurry provides a rough surface enabling tile adhesive to adhere to non-concrete surfaces.

Mixing Ratio
RedifixWaterTile Adhesive
1L1L3kg

Stir the mixture thoroughly. Apply the slurry on to the back of the tile (especially large format tiles) and/or on non-concrete surface using a stiff bristle brush before tile installation. Pot life: 4 hours. Let application dry for at least 4 hours before tile installation. For best results, especially on smooth surfaces, let dry overnight .

REDIFIX as Tile Adhesive Modifier
Non – concrete tile installations require extra flexibility to resist substrate or structural movements due to thermal deformation & vibrations. Redifix modified tile adhesive makes tile installations more flexible to be able to adapt to different substrate conditions.

Mixing Ratio
RedifixWaterTile Adhesive
4L4L25kg

Caution: Redifix modified Tile Adhesive has a very short open time. It is very important to observe open time & pot life. Once the open time has lapsed, the product will harden and will lose its adhesion strength.

Once mixed, apply immediately Redifix modified tile adhesive using a notched trowel and install tiles right away.

Note: Refer to ABC Tile Adhesive packaging or technical leaflet for proper Tile Installation instructions.