tile-adhesive tile adhesive - packaging pdf Sectional Detail printTechnical Data Sheet
PRODUCT NAME
ABC TILE ADHESIVE Original
PRODUCT DESCRIPTION
ABC TILE ADHESIVE Original is a cement-based adhesive designed for bonding all kinds, types & sizes of tiles (earthenware, porcelain & mosaic tiles) and stoneware for floor and wall tile installations on indoor and outdoor concrete surfaces using the thinbed method. Only high quality aggregates and selected chemical additives are used strictly conforming to International Standards.
THE ABC TILE ADHESIVE ADVANTAGE
  • Superior bonding
  • High Tensile Strength
  • Flexible
  • Thermal Deformability
  • High Shear Strength
  • Fast & Easy Installation
  • Professional Finish
  • Economical
COLORS
Gray & White
CLASSIFICATION STANDARD
  • ANSI A118.1 (USA) American National Standards Institute
  • EN 12004 : 2000 (EU) European Standard
  • PNS ISO 13007 – 1:2005 Type C1 (PH) Philippine National Standards
TECHNICAL DATA
SURFACE PREPARATION
The surface must be fully cured, structurally stable, level, even, clean and free from contaminants such as dirt, dust, loose material, oils and chemicals. The use of a spirit level bar is essential to ensure levelness and / or plumbness of the surface. For painted surfaces, acid etch or abrade paint to ensure proper bonding.
APPLICATION GUIDE
1. Mixing Caution: Use only non-absorptive materials as mixing base (plastic pail or galvanized iron sheets). If absorbent materials such as plywood, wooden box, gypsum board, fiber cement board or cardboard is used, it will affect the chemical properties of the product, which can result in bonding failure and poor product performance. Use ONLY non-absorbent materials such as plastic pail or galvanized iron sheet as mixing base. Pour water into container and add ABC TILE ADHESIVE Original powder. Stir to attain a smooth, lump-free and pasty consistency. Let it rest for 15 minutes & restir briefly before use. 2. Application Dampen surface before application. Use a notched trowel to spread mortar evenly over an area of 1m2 at a time to produce a ribbed thinbed. 3. Installation Install tiles within the open time. Adjust and align tiles. Use a rubber mallet to apply pressure on the tiles. NOTE: Do random checks if the back of the tiles are fully covered with tile adhesive. Check if tile adhesive mortar still adheres to your finger to find out if the open time has not lapsed. If open time has lapsed, DO NOT add newly prepared tile adhesive to a previously mixed batch. Remove old tile adhesive layer and reapply a new one to avoid bonding failure. TIP: Use tile spacers for uniform grout lines. A tile joint width is needed to accommodate possible tile movement due to thermal deformation, substrate shrinkage or tile expansion, thus preventing the tile from cracking.
SECTIONAL DETAIL
COVERAGE
PACKAGING
5 kg and 25 kg bag
STORAGE & SHELF LIFE
Store in a cool dry place. ABC Tile Adhesive Original will remain usable one year from date of manufacture.
WARRANTY
Due to variety of applications, different working methods and the various properties of bases, we cannot assume responsibility or liability with regard to the application of our products. Our guarantee and liability are restricted to the quality of our products at the time of acceptance of the customer of such products. In no case shall our liability extend beyond replacement of defective products, if any, found at the time of acceptance. For all deliveries and services, our General Sales Condition including warranties stipulated for each case are valid.
VIDEO
  tile-adhesive - heavyduty-logo tile-adhesive - heavyduty - packaging pdfSectional Detail printTechnical Data Sheet
PRODUCT NAME
ABC TILE ADHESIVE Heavy-Duty
PRODUCT DESCRIPTION
ABC TILE ADHESIVE Heavy-Duty is a is a cement-based adhesive designed for bonding all types of tiles for floor & wall tile installations. Application areas include indoor & outdoor concrete surfaces using the thinbed method. ABC TILE ADHESIVE HEAVYDUTY is primarily used for low porosity tiles, glass mosaic tiles, stoneware & all types of large format tiles. It is highly recommended for outdoor tiling, pool & water features & all heavy-foot traffic areas.
THE ABC TILE ADHESIVE HEAVY-DUTY ADVANTAGE
  • Extra Strong
  • High Tensile Strength
  • Flexible
  • Thermal Deformability
  • High Shear Strength
  • Fast & Easy Installation
  • Professional Finish
  • Economical
COLORS
Gray & White
CLASSIFICATION STANDARD
  • ANSI A118.1 (USA) American National Standards Institute
  • EN 12004 : 2000 (EU) European Standard
  • PNS ISO 13007 – 1:2005 Type C2 (PH) Philippine National Standards
TECHNICAL DATA
COVERAGE
SURFACE PREPARATION
The surface must be fully cured, structurally stable & level. Make sure the surface is clean and free from contaminants such as dirt, dust, loose material, oils and chemicals. If needed, acid etch the surface area to be applied (e.g. on existing polished or waxed floors).
APPLICATION GUIDE
1. Mixing Use ONLY non-absorbent materials such as plastic pail or galvanized iron sheet as mixing base. Pour water into container and add ABC TILE ADHESIVE Heavy-Duty powder. Stir to attain a smooth, lump-free and pasty consistency. Let it rest for 15 minutes and restir briefly before use. 2. Application Dampen surface before application. Use a notched trowel to spread mortar evenly over an area of 1m2 at a time to produce a ribbed thinbed. For large format tiles or stoneware, apply tile adhesive mortar at the back of the tile or stone before installation. 3. Installation Install tiles within the open time. Adjust and align tiles. Use a rubber mallet to apply pressure on the tiles. NOTE: Do random checks if the back of the tiles are fully covered with tile adhesive. Check if tile adhesive mortar still adheres to your finger to find out if the open time has not lapsed. If open time has lapsed, DO NOT add newly prepared tile adhesive to a previously mixed batch. Remove old tile adhesive layer and reapply a new one to avoid bonding failure. TIP: Use tile spacers for uniform grout lines. A tile joint width is needed to accomodate possible tile movement due to thermal deformation, substrate shrinkage or tile expansion, thus preventing the tile from cracking.
SECTIONAL DETAIL
PACKAGING
5 kg and 25 kg bag
STORAGE & SHELF LIFE
Store in a cool dry place. ABC Tile Adhesive Heavy-Duty will remain usable one year from date of manufacture.
WARRANTY
Due to variety of applications, different working methods and the various properties of bases, we cannot assume responsibility or liability with regard to the application of our products. Our guarantee and liability are restricted to the quality of our products at the time of acceptance of the customer of such products. In no case shall our liability extend beyond replacement of defective products, if any, found at the time of acceptance. For all deliveries and services, our General Sales Condition including warranties stipulated for each case are valid.
VIDEO