ABC 2 in 1 MOSAIC TILE ADHESIVE & GROUT
High Adhesive Tensile Strength – Increased mechanical and chemical properties than ordinary cement to withstand surface movement due to thermal deformation, substrate shrinkage or tile expansion.
Non-sag properties and High Initial Adhesiveness – Its high initial adhesive strength and non-sag property enables tiling to start from the top downwards.
Excellent Workability – Makes it easy to adhere tiles immediately on to the surface. Adjust tiles within the open time of 20 minutes without fear of losing tile adhesion.
Fast and Easy Installation – Reduces the steps necessary for mosaic tile installations.
Uniform Color and Non-fading – Resistant to discoloration over time. Consistent color is achieved by following the recommended mixing ratio.
Water Repellant – Blocks water from penetrating into the grout.
Durable and Crack-free
The surface must be fully cured, structurally stable and level, smooth, clean, free from dirt, efflorescence, dust, loose material, oil, chemicals and other contaminants. Acid etch or abrade surface to ensure proper bonding.
TIP: Use ABC Grout Sealer for added protection on water exposed areas to protect against the growth of mold & mildew.
Use ONLY non-absorbent containers such as plastic pail or galvanized iron sheet as mixing base.
Pour clean water and add ABC 2 in 1 powder. Stir to attain a smooth, lump-free & pasty consistency. Use immediately after mixing.
Dampen surface before applying ABC 2 in 1 mortar. Spread mortar evenly over 1m2 at a time using a 10 x 10mm notched trowel to achieve a ribbed thinbed.
Position mosaic tiles within the 20 minute OPEN TIME. Apply pressure using a rubber faced float to squeeze out mortar along grout lines. Distribute excess mortar along grout lines using a squeegee.
TIP: Use tile spacers for uniform grout lines & perfect alignment.
Remove excess mortar with damp sponge in diagonal strokes. Remove haze with a clean, damp and lint-free cloth.
Calculated based on 3 sheets of 30 cm x 30 cm mosaic tiles & 10 x 10mm notched trowel.
Avoid eye exposure and prolonged skin contact. Do not swallow or ingest. In case of irritation, rinse with sufficient water. If symptoms persist, consult your doctor. When stored in a cool and dry place, ABC 2 in 1 MOSAIC TILE ADHESIVE & GROUT will remain usable for 1 year from date of manufacture.
WARRANTY: Due to the variety of applications, the differing methods of working, the various properties of bases, etc., we cannot assume responsibility or liability with regards to the application of our products. Our guarantee and liability are restricted to the quality of our products at the time of acceptance of the customer of such products. In no case shall our liability extend beyond replacement of defective products, if any, found at the time of acceptance. For all deliveries and services, our General Sales Condition including warranties stipulated for each case are valid.